Download PDF HERE

Restore your stone bench to its original pristine appearance and permanently protect it with our I.C. Stone Protection

You don’t have to worry about bacteria, odours, stains or etchings anymore.

Prior to the application of the I.C Stone Protection the surface is vacuum ground and chemically washed to restore the stone to its original quality removing etchings, stains, discolouration and dirty marks.

Available from a Matt to a Full Gloss Finish that makes your Stone Surfaces Easy to Clean & Maintain.

Contact us for a copy of our comprehensive Information Facts sheet and/or arrange for an obligation free quotation. I. C. STONE PROTECTION turns Marble, Limestone & Sandstone into Elegant Worry – free Working Surfaces.

What is I.C. STONE PROTECTION?

A specially formulated polyester based resin system which is water clear and non- yellowing that can be applied to many types of natural stones including marble, limestone, sandstone etc. The protection is applied using specifically developed layers to afford the stones surface outstanding stain and chemical resistance.
The IC Stone Protection is finished in such a manner that it does not look artificial or plastic coated and appears as a natural stone factory finish.

Where can I.C. Stone Protection be used?

 Ideal for bar tops, kitchen tops, vanity tops.
The protection can be either applied prior to or following installation of a new top, subject to particular onsite circumstances, such as size or site joints etc.
The protection can also be applied to an existing top to restore a damaged surface.
 Note: We recommend that a sample piece of the selected stone be submitted for trial with our composite prior to applying it to the main product, or contact us for advice.

How is I.C. Stone Protection applied?

[1]    The stone surface is ground to ensure the protection can bond satisfactorily.
[2]    The stone surface is chemically cleaned and dried to ensure it is dust and moisture free.
[3]    The stone surface is covered with 3 specially developed layers.

IC Stone Protection Prime Layer	ICSPPL-071 (Yellow)
IC Stone Protection Intermediate Layer	ICSPIL -072  (Blue)
IC Stone Protection Top Layer	ICSPTL-073  (Red)

Once the top layer has set/dried, the stone bench top may be used prior to finishing.
[4]     The stone protection is fine sanded and polished to the required level of gloss.
Our ‘Honed’ finish is recommended for a natural stone look; however the stone protection can be polished to any level of gloss.

Note:   48 hours should be allowed prior to fine sanding and polishing to the required level to allow the stone protection to reach reasonable hardness.

Is I.C. Stone Protection scratch resistant?

Following the initial curing of the stone protection, the surface attains a hardness of approximately 2 [similar to that of limestone] on a MOH scale [used for stone] of 1 to 10 with the max.hardness of approximately 3.5 – 4 [similar to that of marble] being reached by three months, depending on the local temperatures. Scratches may occur prior to full surface hardening but these can be easily removed.

Can hot containers be placed on I.C. Stone Protection?

Whilst one of the additives in our stone protection is an exclusive clear fire retardant, it is not recommended to place hot pans or hot dishes directly on the surface – always use a protective mat.

I.C. Stone Protection has been developed to turn Marble, Limestone and Sandstone into an elegant WORKING worry free surface.

How long will the application process take and how much will I.C. Stone Protection cost?

These are variable questions and would need to be assessed job by job. In the case of onsite application in particular we would need to take into consideration the size, location and any other constraints or circumstances. Please contact us to discuss further.

Can I.C. Stone Protection be resurfaced?

Yes! The surface can be repolished as per step [4] at any time.
 If in extraordinary circumstances the surface has become heavily scratched it can be recoated with the I.C. Stone Protection Top Layer.
Note: If the IC Stone Protection is damaged in a small area it can be locally repaired without visible trace.

Can I.C. Stone Protection be used to repair chips prior to coating?

Yes, the IC Stone Protection Prime layer can be coloured, tinted or filled with stone granules for repairs before the ‘Base Prime’ coat is applied.

How is I.C. Stone Protection maintained?

The stone protection is a hardwearing durable surface that is easy to maintain using soapy   water or standard cleaning materials, - spills simply wipe off.
Note: Do not use sharp knifes or blades directly on the bench top’s surface – always use a chopping board.

Who can apply I.C. Stone Protection?

I.C. Stone Protection should only be applied by an Authorised applicator.

Can I.C. Stone Protection be applied to granite?

The stone protection has been developed specifically for marble, limestone and sandstone. However, it may be possible to coat some granites but it is recommended that a sample be subjected for trial with our coating. Please contact us for further information.

Why use I.C. Stone Protection?

Marble and Limestone are composed of calcite which is highly sensitive to acid spills which corrodes the surface [etching] thus damaging the polished or honed finish.
Some Marble and Limestone can also be porous and susceptible to staining. Stones such as unfilled ‘Travertine’ have natural cavities which can be filled with clear composite to highlight the features in the stone.
Stones such as Sandstone and Basalts are not receptive to a high honed or polished   finish and are easily susceptible to staining. The application of our IC Stone Protection enriches the colours and veins of such materials and makes them suitable as a bench top surface.

   I.C. Stone Protection has been developed to turn Marble, limestone and Sandstone into an elegant WORKING worry free surface.

Balencea Apartments, Melbourne

I.C. STONE PROTECTION allows the freedom of choice to use marble, limestone, sandstone, and other stones for their beauty and opulent characteristics.

IC Stone Protection is a special formulation with the following features:
- A totally sealed surface that has outstanding stain and etch proofing qualities.
- A totally hygienic surface that will not harbour bacteria or odours.
- Fills open fissures, cavities and faults.
- Covers over joints to give a seamless surface.
- The coating can be finished to the same appearance as natural ‘Honed’ stone,
   or finished to varying levels of gloss equivalent to a higher polished stone.
- A worry free practical work surface which does not look artificial.
- Increased scope for Architects, Designers and Consumers in material selection.

IC Stone Protection is ideal for both domestic and commercial applications for either rejuvenating old stone or protecting new stones, used particularly in areas such as bars, kitchens and bathrooms.

I. C. Stone Protection turns Marble into an Elegant Working Surface.